Exseed Dabcool W2 Glass Bubbler
- Qiymət:
-
24,13 ₼
26,26 ₼ - Shipping:
-
Unfortunately, there is no shipping option available to your country
Main Features
Features:
1. On/Off: Press For 3seconds
2. 4 Unique Manual Heat Settings(450℉/500℉/550℉/600℉)
3. 20 Second Average Heat-Up Time
4.Micro-USB Fast Charging, Full Charge Time:About 2 Hours
5.Atomizer Fit Puff pe_ak
6.The Device Has Low Voltage Protection, Short Circuit Protection And Overheating Protection.
How to use:
STEP 1: Fully charge device before first use. White lights pulse while charging, and turn off automatically when complete.(1 light: 0-25%; 2 lights: 25-50%; 3 lights: 50-75% ; 4 lights: 75-100%)
STEP 2: Fill glass with water just above the air-hole. Do not fill glass while attached to base. X- Do not allow water in lower section!
STEP 3: Align inlet hole on the front of the glass with atomizer. Carefully place the glass into the base.
STEP 4: Hold the button for 3 seconds to turn on device (same way to turn off device). The white lights will flash once and the ambient lights will flash sequentially red>blue>green.
STEP 5: Single click to toggle through heat settings. 1 white light: 450℉ 2 white lights: 500℉ 3 white lights: 550℉ 4 white lights: 600℉ Device will vibrate once while changing heat.
STEP 6: Use Loading Tool to place contents on the bottom surface of the bowl [not the side].
STEP 7: Place carb cap on top of atomizer.
STEP 8: Double click to initiate heat-up [5 seconds avg. ], device will vibrate twice and ambient lights will be red. Single click the button to turn off the heat-up process at anytime.
STEP 9: Ambient lights will turn green when ready. ( green lights will be on for 20 seconds, then heat up process automatically stop and ambient lights turn blue)
STEP 10: Use a cotton swab to clean the chamber after each use.
| Brendlər |
Exseed
|
| Color (from option) |
White
|
- Təhlükəsizlik
- (0)
- Rahatlıq
- (0)
- Dizayn
- (0)
